AEG S83600CSM1 user manual Remove the doors

Installation 21

1.	Open the doors. Unscrew the middle
	hinge (m2). Remove the plastic spacer
	(m1).
2.	Remove the spacer (m6) and move to
	the other side of the hinge pivot (m5).
3.	Remove the doors.

m1 m2

4.	Remove the left-hand cover pin of the
	middle hinge (m3,m4) and move to the
	other side.
5.	Fit the pin of the middle hinge (m5) into

m5

m6

the left-hand hole of the lower door.

m3 m4

6.Remove using a tool the cover (b1). Un- screw the lower hinge pivot (b2) and the spacer (b3) and place them on the op- posite side.

7.Re-insert the cover (b1) on the opposite side.

8.Remove the handle. Unscrew the top handle bracket from the handle rod (h1). Unscrew the bottom handle bracket from the door (h2)

Unscrew the top handle bracket from the door (h3).

9.Install the handle in the opposite side.

Re-screw the handle bracket on the door (h4). Turn the handle bracket with the handle and screw them to the door (h5) and the fitted handle bracket (h6).

10.Remove using a tool the cover. (c1). Unscrew the upper hinge pivot (c2) and

11.place it on the opposite side.

		b1
		b2
		b3
h1	h2	h3

h4 h5h6