Structure of the appliance
Control panel
1 Programme chart/Selector dial
This will help you to select the correct programme for drying: electronically or time controlled. Turn the dial to the required programme or time.
2 ON/OFF button
This button is used to switch the dryer on. At the end of the pro gramme, release this button by pressing it again
to switch the dryer off.
3
It comes on when the appliance is switched on (ON/OFF button pressed down) and goes out when this button is released.
4 Low temperature button
Pressing this button allows drying to be performed at a lower tem- perature, for delicate items. The corresponding pilot light comes on.
5 Buzzer OFF button
Press this button when selecting the programm if you wish to switch the buzzer off during the anticreasing phase.
The corresponding pilot light comes on.
6 Start button
Press this button for about 2 seconds to start the dryer after having selected the drying programme.
If the door is opened while the programme is running, this button must be pressed again after closing the door in order to
This button must also be pressed after a power cut.
12