Smoething not working?
Something not working?
If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the
Problem
The drier is not working properly
Possible cause | Remedy | |
|
| |
|
| |
Mains plug disconnected | Plug in mains plug | |
|
| |
No programme selected | Select programme | |
|
| |
Loading door open | Close loading door | |
|
| |
Fuse or residual current cir- | Check fuse or residual current | |
circuit breaker. | ||
cuit breaker in fuse box | ||
Faults can be eliminated by an | ||
(domestic installation) faulty | ||
electrical engineer | ||
| ||
|
|
The drying results are not satisfactory
Wrong programme selected | Select another (time) programme | |
| for the next drying cycle | |
| Clean lint filter | |
Lint filter blocked | ||
| ||
|
| |
| Observe recommended filling | |
Wrong filling quantity | ||
quantity | ||
| ||
|
| |
Laundry not sufficiently dried | ||
| ||
|
| |
|
| |
Deposit on the drum inner | Clean drum inner surface and | |
surfaceor on the drum ribs | drum ribs | |
|
|
22
