Operating instructions
16
Performing a Washing Cycle

Brief Instructions

A washing cycle is performed in the following steps:
0 1.Open the door, load the washing.
2. Close the door.
3. Add detergent/conditioner.
4. Set the correct washing program:
–Set the program on the program selector;
–Set the temperature on the temperature selector;
–In the case of easy-care washing: Press the EASY-CARES button.
5. Press the ON/OFF button.
The washing machine is switched on. The washing program starts.
6. If necessary, change the spin speed or select rinse hold.
You can alter this setting and the temperature during the entire wash-
ing cycle.
At the end of the washing program:
Important! If the washing cycle ends with a rinse hold, perform either
PUMP OUT, SPIN or SHORT SPIN before opening the door.
3 For safety reasons, the door remains locked for 1-2 minutes after the
end of the program.
7. Open thedoor, remove the washing.
8. Press the ON/OFF button.
The washing machine is switched off.