AEG W 808 Running a Wash Cycle, Brief Instructions, When the wash programme has been completed

Operating Instructions

Running a Wash Cycle

Brief Instructions

To run a wash cycle:

01. Open the door and fill with washing.

2.Close the door.

3.Add washing detergent / care agent.

4.Set the wash programme

–Set the programme using the programme knob;

–Set the temperature using the temperature selector;

–Set any additional programme required.

5.If necessary, change the spin speed or select o(RINSE HOLD).

You can alter this setting and the temperature at any time during the wash.

6.Press M (ON/OFF) button. Power indicator light comes on.

The washing machine has been switched on. The wash programme will start.

When the wash programme has been completed:

Important! If the wash cycle ends on rinse hold run v15 (PUMP OUT) or Position 5 or 10 (SPIN) before opening the door.

3	For safety reasons, the door remains locked for 1-2 minutes after the
	end of the programme.

7.Open the door and remove the washing.

8.Press M (ON/OFF) button. The power indicator light will go out. The washing machine is switched off.

18