Installation and Connection Instructions
40
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
1 WARNING - THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should these safety
measures not be observed.
Before switching on, make sure
the electricity supply voltage is
the same as that indicated on
the appliance rating plate.
The rating plate is located at
the top of the rim of the open
door.
The appliance is supplied with a 13amp plug fitted. In the event of hav-
ing to change the fuse in the plug supplied, a 13amp ASTA approved
(BS 1362) fuse must be used.
Should the plug need to be replaced
for any reason. The wires in the
mains lead are coloured in accord-
ance with the following code:
Green and Yellow : Earth
Blue : Neutral
Brown : Live
 The wire coloured green and yellow must be connected to the termi-
nal marked with the letter E or by the earth symbol or coloured
green and yellow.
 The wire coloured blue must be connected to the terminal N or col-
oured black.
 The wire coloured brown must be connected to the terminal marked
L or coloured red.
 Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
1 WARNING! A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Ensure that the cut off plug is disposed
of safely.
Blue
Green
& Yellow
Brown
Cord Clamp