AeroGarden 100633, 200633 AeroGarden6 Elite+ Control Panel, Select, Lights On/Off, Add Nutrients

Basic Reminders About Your AeroGarden

AeroGarden6 Elite+ Control Panel

• Select • Lights On/Off

The number of hours the lights are on and off depends on which plant type is selected. Use “Select” button to reach “24-Hour Light” setting (see page 9).

Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle, and occasional use of this feature will not harm your plants.

Add Nutrients

Replace

Bulbs

• Add Nutrients

(Feed Garden - Basic Feeding)

When “Add Nutrients” and “Water Low” lights start blinking (every 2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release “Reset” button to restart nutrient timer and turn off blinking lights.

*See Tending & Harvesting Guide for plant-specific nutrient information.

	Herbs
Salad	Flowers
Greens		Water Low
		24-Hour
Vegetables	Live Plants	Light

• Replace Bulbs†

When light blinks (after 6 months of use), it is time to replace Grow Bulbs. Order bulbs at www.aerogardensupport.com or from your retailer. After replacing Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light.

NOTE: If you store your AeroGarden 6 Elite+ be- tween uses, grow bulb timer automatically stops when Garden is unplugged.

†See complete replacement instructions on next page.

• Water Low

When light blinks add water up to “Fill To Here.”

•Remove Bio-Domes

When plants appear through hole in Seed Pod Label, remove Bio-Domeand discard or recycle.

NOTE: Never remove Seed Pod Labels.

11