ATP/AST Series Product Specifications
2-4. Electrical Characteristics
§ Terminal Resistance Test
Condition: | Top and bottom electrodes are measured at the terminal. |
Judgement: | Must satisfy the specification. |
§ Insulation Resistance Test
Neighboring Terminals: Measured by applying the reference voltage to the terminals
Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes.
Judgement: | Must satisfy the specification. |
§Appearance Test
Condition: Tested by an examiner with over 1.0 eyesight at 30cm away from the product under the transmittable light at over 60° the surface of the product.
Judgement: Must satisfy the specification.
6 | Rev. 10©1999 - 2006 DMC Co., Ltd. |