Troubleshooting
In the Event of a Power Failure
Most power failures are corrected within two hours and will not affect the unit’s temperature providing you minimize the number of door openings while the power is off. If it is extremely hot and power remains off for an extended period of time you may want to move the contents of your refrigerator to a cooler place until power is restored.
What to Do If You Need Service
Before calling for service, check the trouble shooting table. This table lists possible problems that you can remedy without difficulty to avoid an unnecessary service call.
If you do need service, contact your dealer or the manufacturer. In any correspondence, refer to the model number and serial number of your unit which is located on the lower front cabinet flange. Retain your proof of purchase. You may want to record these numbers in the space provided on page 8. Follow the procedure outlined on page 9.
Problem | Possible Causes/Solutions | |
Odor in cabinet | • | Interior needs cleaning |
|
|
|
Noisy operation | • | Cabinet not level |
| • | Weak floor |
|
|
|
Cabinet vibrates | • | Cabinet not level |
| • | Weak floor |
|
|
|
Cabinet light not working | • | Tube burned out |
| • | No power at outlet |
|
|
|
Appliance will not run | • | Temperature control turned to “OFF” |
| • | Line cord not plugged in |
| • | No power at electrical outlet |
| • House fuse blown | |
|
|
|
Appliance runs too long | • | Prolonged door openings |
| • | Control set too cold |
| • | Condenser needs cleaning |
|
|
|
Moisture collects inside | • | Too many door openings |
| • | Prolonged door openings |
| • | Hot, humid weather increases condensation |
|
|
|
Moisture collects on outside surface | • | Hot, humid weather increases condensation. |
|
| As humidity decreases, moisture will disappear. |
| • | Control improperly set. |
|
|
|
Interior too hot/too cold | • | Control improperly set |
| • | Faulty thermometer |
| • | Relocate thermometer to center of cabinet |
|
| and recheck |
8All specifications and product design subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.