Setup

Tray

When placing media in the tray, refer to the instructions below.

When using the multi-purpose tray, refer to page 16.

CAUTION:

•Be sure to hold the media tray with both hands so that you do not drop it. The media tray weighs approximately 6.4 kg (14 lbs.) when it is fully loaded.

NOTE:

•When the tray cover is open or the multi-purpose tray is used, you cannot pull the media tray out of the printer or open the front door.

Be sure to close the multi-purpose tray and the tray cover before pulling the media tray out of the printer or opening the front door.

Tray cover

Using the Media Tray

Media Type

Media Weight

Media Size

Plain paper

75 - 105 g/m2

 

Bond/Letterhead

 

(20 - 28 lb.)

Letter, Legal, A4,

Recycled paper

 

B5 (JIS)

 

 

Thin paper

60 - 75 g/m2

 

 

(16 - 20 lb.)

 

 

 

 

1 Pull the media tray (1) out of the printer while slightly raising its front portion and remove the tray pad (2).

2 Pinch the media guides and slide them to the width of the media.

Media guides

3 Slide the length guide unit to adjust it to the media length. Slide the length guide unit (2) while pressing the PUSH mark (1) to extend it.

Length guide unit

Setup

 

Slide stopper

NOTE:

•When adjusting the length guide unit to the media length, make sure the slide stopper of the length guide unit is fixed by the slit of the media tray.

4 Tap the media stack on an even surface to avoid media jams or skewed printing.

NOTES:

2

1

•Be careful not to leave fingerprints on the media, which can result in a smudged print.

•Reusing media (used paper or jammed paper) that has been fed through the printer once can reduce the life of the consumables and paper path components.

15