Setting the Date and Time
When the camera is first turned on, the date and time setting will not be correct. So before using, be sure to set date and time.
1. Press the MENU button, using 
or 
to select SETUP (
) and press the SET button.
2.Press 
or 
to select DATE & TIME (
) then press 
or the SET button to launch the Date & Time screen.
3.Press 
or 
to change the value of the highlighted field. Press 
or 
to highlight another field.
4.After adjusting the settings, press the SET or the MENU button to apply the setting.
NOTE:
If you hold down 
or 
, you can change the value quickly.
For printing images with Date & Time,
If the batteries are removed for about two days, the Date & Time setting will be lost. In this case, make these settings again.
- 14 -
