5
Inserting the Batteries
The camera is powered by two AA-size alkaline batteries or rechargeable NiMH (min.
2500 mAh / 1.2V) batteries.
Open the battery cov er.
ySlide the battery cover in the direction
indicated by the arrow.
Insert th e batteries .
yInsert two AA-size batteries with the
positive (+) and negative (-) poles
matching the directions indicated inside
the battery room.
Close the battery cover.
Low Batte ry Indicator
A low battery indicator appears on the LCD screen when the batteries are
nearly exhausted. Batteries should be replaced promptly when the low battery
indicator appears.
yRisk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
yBe sure to turn off the camera power before insert or remove batteries.
yUse only Alkaline or NiMH battery to power this camera. Use of any other type
battery is not recommended.
yReplace all batteries at the same time. Never mix old and new batteries.
yRemove batteries if you will not be using them for a long time.
yThe camera body may feel warm after extended use. This is normal.
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 18).
1
2
3
C
Ca
au
ut
ti
io
on
n