Common Commands, ABORt | Agilent Technologies 35670A guide

Common Commands

*CAL?	Calibrates analyzer and returns the result
*CLS	Clears the Status Byte
*ESE 0~255	Sets or queries bits in the Standard Event
	Enable register
*ESR?	Reads and clears the Standard Event
	event register
*IDN?	Returns analyzer’s identification string
*OPC	Enables the status bit to be set for completion
	of overlapped commands
*OPC?	Queries completion of overlapped commands
*OPT?	Returns analyzer’s option configuration
*PCB-? 0~30[,0~30]	Sets the pass-control-back address
*PSC -32767~32767	Sets or queries Power-On Status Clear flag
*RST	Executes a device reset
*SRE 0~255	Sets or queries bits in the Service Request Enable
	register
*STB?	Reads Status Byte register
*TRG	Triggers analyzer
*TST?	Performs self test
*WAI	Wait-to-continue command

ARM[:IMMediate]

ARM:RPM:INCRement 1~500000[RPM]

ARM:RPM:MODE OFF0UPDOWN

ARM:RPM:THReshold 5~491520[RPM]

ARM:SOURce IMMediateMANualRPMTIMer

ARM:TIMer 0~500000[S]