STAT:OPER:ENAB
This command and its query set and read the value of the Operational Enable register. This register is a mask for enabling specific bits from the Operation Event register to set the operation summary bit (OPER) of the Status Byte register. This bit (bit 7) is the logical OR of all the Operational Event register bits that are enabled by the Status Operation Enable register.
Command Syntax | STATus:OPERation:ENABle <NRf> |
Parameters | 0 to 32727 |
Suffix | (None) |
Default Value | 0 |
Examples | STAT:OPER:ENAB 1312 STAT:OPER:ENAB 1 |
| STATUS:OPERATION:ENABLE? |
Query Syntax | STATus:OPERation:ENABle? |
Returned Parameters | <NR1> (Register value) |
Related Commands | STAT:OPER:EVEN |
STAT:OPER NTR
STAT:OPER PTR
These commands set or read the value of the Operation NTR
•When a bit in the Operation NTR register is set to 1, then a
•When a bit of the Operation PTR register is set to 1, then a
•If the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the Operation Condition register sets the corresponding bit in the Operation Event register.
•If the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the Operation Condition register can set the corresponding bit in the Operation Event register.
Note
Command Syntax | STATus:OPERtion:NTRansition <NRf> | |
| STATus:OPERtion:PTRansition <NRf> | |
Parameters | 0 to 32727 |
|
Suffix | (None) |
|
Default Value | 0 |
|
Examples | STAT:OPER:NTR 32 | STAT:OPER:PTR 1312 |
Query Syntax | STAT:OPER:NTR? | STAT:OPER:PTR? |
Returned Parameters | <NR1> (Register value) | |
Related Commands | STAT:OPER:ENAB |
|
42 Language Dictionary