Agilent 8510C Network Analyzer Family

45 MHz to 110 GHz

Configuration Guide

The Agilent Technologies 8510C is a modular family of compatible products. For flexibility in specifying a solution that meets your exact needs, a system is typically ordered as separate line items. For those who wish ordering convenience, complete bundled systems are available. Whether ordering individual components or a bundled sys- tem, all 8510C network analyzers include one-year, on-site service. For systems built from individual components, installation may be ordered sepa- rately. A PC running BASIC Rev 6.3 or higher under Windows® (3.1/95/NT) is recommended for installation and service.

Complete systems

Agilent 8510XF family 110 GHz single sweep systems (45 MHz to 110 GHz)

The 8510XF family has two models which are complete single-connection, single-sweep vector network analyzer systems that offer S-parameter measurements over an ultra-broadband frequency in a 1.0 mm coaxial connector. The broadest fre- quency model covers 45 MHz to 110 GHz. A lower frequency model is available covering 45 MHz to 85 GHz. Both systems are designed to facilitate easy connection to wafer probe hardware while still preserving excellent RF measurement perform- ance. In addition, the system can be used to make coaxial measurements (to interface to a coaxial fix- ture or a coaxial DUT) using the same millimeter head configuration.

Agilent E7340A single-connection single-sweep network analyzer system (2 to 85 GHz)

The E7340A is a complete system configured with an 8510C, a 20 GHz and 50 GHz synthesizer, two

85 GHz S-parameter test heads, and a millimeter test set controller. The instruments are integrated in the system rack, the system is fully tested, and a complete system verification is performed prior to shipment from Agilent. Installation is included at no additional charge. The E7340A system does not include calibration kits or test port cable sets. System components include:

8510C network analyzer E7342A millimeter subsystem 83621B synthesizer 83651B synthesizer

System rack

Calibration kits and test port cables are not included and must be ordered separately.

Test set options

•E7340A-STDStandard configuration

•E7340A-005Add (45 MHz to 2 GHz) low frequency extension

•E7340A-006Add RF pass thru (provides coupled output of 50 GHz source for additional test set(s). Additional test set(s) must have Option 001 installed)

•E7340A-056Low frequency extension and RF pass through

Features

• 8510C-010Add time domain

Voltage options

•E7340A-115110/120 V line voltage operation

•E7340A-230220/240 V line voltage operation

Extended service options are available.

Page 2
Page 1
Image 1
Agilent Technologies 8510C manual MHz to 110 GHz, Complete systems, Test set options, Features, Voltage options
Page 2

8510C specifications

Agilent Technologies 8510C is a sophisticated network analyzer renowned for its high performance and precision in measuring small signals. Renowned in the electronic test and measurement industry, the 8510C is particularly suited for applications in microwave and RF engineering. This versatile instrument excels in characterizing both passive and active devices, making it indispensable for engineers working on circuit design, antenna measurement, and RF component testing.

One of the main features of the 8510C is its frequency coverage, which spans from 10 MHz to 50 GHz, allowing users to test a wide range of devices and components. This broad frequency range enables the analyzer to address various applications involving microwave frequencies, such as satellite communications and radar systems. Additionally, the device provides exceptional dynamic range, enabling accurate measurements of weak signals alongside more robust signals, a critical feature for today’s complex systems.

The 8510C utilizes state-of-the-art frequency synthesis technology, which enhances its signal stability and allows for precise frequency sweeps. It employs direct signal sampling techniques to improve measurement accuracy and reduce noise, providing engineers with reliable data to support their designs. The instrument boasts a high-resolution display that aids in visualizing S-parameter measurements, enhancing the analysis of transmission and reflection characteristics of devices under test.

Another prominent characteristic of the 8510C is its ability to perform automated measurements, greatly improving productivity in the lab. The device supports multiple measurement formats, including time domain and frequency domain measurements, broadening its application range. Additionally, it can be integrated with other Agilent instruments, offering seamless interconnectivity and advanced measurement capabilities.

The intuitive user interface simplifies operation, allowing engineers to focus on measurement tasks rather than navigating complex controls. The 8510C is compatible with several software packages, including Agilent’s ADS (Advanced Design System), facilitating comprehensive data analysis and modeling.

In summary, the Agilent Technologies 8510C is a cutting-edge network analyzer characterized by its extensive frequency coverage, remarkable dynamic range, accurate measurements, and user-friendly interface. This instrument empowers engineers to achieve high levels of precision and efficiency in their testing processes, making it a cornerstone in the field of RF and microwave engineering.
Top Page Image Contents