Agilent Technologies Agilent E1345A manual Product Specifications, General Specifications

Product Specifications

Input

DC:
Maximum voltage (any terminal to any other terminal or	120	Vdc
chassis):
AC rms:
Maximum voltage (any terminal to any other terminal or	120	V rms
chassis):
Maximum current (per channel common, non-	50 mA
inductive):
Maximum power per channel:	1 VA

DC
Maximum thermal offset
per channel, differential	4 µV
Hi-Lo:
Closed channel resistance:	100 Ω ± 10%
Insulation resistance	10E9 Ω
(between any two points):
Insulation resistance	n/a
(Hi to Lo, power off):
AC
Minimum bandwidth	10 MHz (protection resistors shorted)
(-3 dB, 50 Ω source/load):
Crosstalk (channel-to-
channel):
100 kHz:	±70 dB
10 MHz:	±20 dB
Both:	n/a
Closed channel	<150 pF Hi-Lo, <150 pF Lo-Guard, <2000 pF
capacitance:	Guard-Chassis

General Characteristics

Relays:	Reed relays
	Break-before-make
	Relays open on power down
Minimum relay life:	Relays open on power up
No load:	10E8 operations
Rated load:	10E7 operations
Screw terminal wire size:	16 to 26 AWG (1.5, 1.2, 0.9, 0.75, 0.5 mm)
Scanning rate:	600 channels/s typ.

General Specifications

VXI Characteristics

VXI device type:	Register based, A16, slave only
Size:	B
Slots:	1
Connectors:	P1
Shared memory:	None
VXI busses:	None
C-size compatibility:	Requires E1403C

Instrument Drivers

See the Agilent Technologies Website (http://www.agilent.com/find/ inst_drivers) for driver availability and downloading.

Command module	Downloadable
firmware:
Command module	A.01
firmware rev:
I-SCPI Win 3.1:	Yes
I-SCPI Series 700:	Yes
C-SCPI LynxOS:	Yes
C-SCPI Series 700:	Yes
Panel Drivers:	Yes
VXIplug&play Win	Yes
Framework:
plug&play Win 95/NT	Yes
Framework:
VXIplug&play HP-UX	No
Framework:

2