American Standard 2908.018W Reminiscence Drop-Inwhirlpool & Bathing Pool, High Gloss Acrylic

REMINISCENCE™ DROP-IN WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

330mm

(13)

457mm

(18)

914mm

(36)

INTEGRAL FITTING DECK

1676mm

ON/OFF	(66)		330mm
			(13)
SWITCH
229 x 305mm		PUMP	457mm
			(18)
(9 X 12)
FLOOR
CUTOUT			914mm
			(36)
64mm REF.			INTEGRAL
(2-1/2)
			FITTING DECK

1676mm

(66)

229 x 305mm (9 X 12) FLOOR CUTOUT

64mm REF. (2-1/2)

152mm		OUTLINE OF	PROVIDE ACCESS
(6)	C/L OF		TO PUMP FOR SERVICE
		CUTOUT
	DRAIN		ON ALL INSTALLATIONS
	OUTLET	SAFE-T-HEATER
	RIM AT
		REMOVABLE BLANK
	DRAIN END
C/L OF OVERFLOW		LEVELING STRINGER		73mm
		(NOT FOR SUPPORT)
				(2-7/8)
149mm REF.
(5-7/8)
INTEGRAL	79mm			616mm
	(3-1/8)			(24-1/4)
SUPPORT
FEET				464mm
	ROUGH			(18-1/4)
	FLOOR
	1-1/2 N.P.T.M. THREADS
	1-1/2 O.D.TAILPIECE	70mm		117mm
				(4-5/8)
		(2-3/4)

152mm		OUTLINE OF
(6)	C/L OF
		CUTOUT
	DRAIN
	OUTLET
C/L OF OVERFLOW	RIM AT
	DRAIN END	LEVELING STRINGER	73mm
		(NOT FOR SUPPORT)
			(2-7/8)
149mm REF.
(5-7/8)
79mm			616mm
INTEGRAL (3-1/8)			(24-1/4)
SUPPORT			464mm
FEET
ROUGH			(18-1/4)
FLOOR
1-1/2 N.P.T.M. THREADS
1-1/2 O.D.TAILPIECE		70mm	117mm
			(4-5/8)
		(2-3/4)

GENERAL SPECIFICATIONS FOR 2908 WHIRLPOOL

INSTALLED SIZE	66 x 36 x 24-1/4 In. (1676 x 914 x 616mm)
WEIGHT					95 Lbs. (43 Kg.)
WEIGHT w/WATER				659 Lbs. (299 Kg.)
GAL. TO OVERFLOW					68 Gal. (257 L.)
MIN. OPERATING GAL.					55 Gal. (208 L.)
BATHING WELL AT SUMP			40 x 18 In. (1016 x 457mm)
BATHING WELL AT RIM			53 x 28 In. (1330 x 718mm)
WATER DEPTH TO OVERFLOW					15 In. (381mm)
FLOOR LOADING		40 Lbs./Sq. Ft. (191 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.						23.8
CUBE (FT3)						44.5

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP		1.6 HP, 9.7 AMPS, 120V.
SYSTEM II PUMP	2.1 HP, 15.6 AMPS, 120V.

GENERAL SPECIFICATIONS FOR 2908 BATHING POOL

INSTALLED SIZE				66 x 36 x 24-1/4 In.
		(1676mm x 914 mm x 616mm)
WEIGHT					95 Lbs. (43 Kg.)
WEIGHT w/WATER				659 Lbs. (299 Kg.)
GAL. TO OVERFLOW.					68 Gal. (257 L.)
BATHING WELL AT SUMP			40 x 18 In. (1016 x 457mm)
BATHING WELL AT RIM			53 x 28 In. (1330 x 718mm)
WATER DEPTH TO OVERFLOW					15 In. (381mm)
FLOOR LOADING	39 Lbs./Sq. Ft. (187 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.						23.8
CUBE (FT3)							44.5

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2005 American Standard Inc.