American Standard 2908.018WC, 2908.028W dimensions Reminiscence Drop-Inwhirlpool & Bathing Pool

REMINISCENCE™ DROP-IN WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

REMINISCENCE DROP-IN WHIRLPOOL & BATHING POOL

❏2908.018W Whirlpool featuring System I

•Acrylic with fiberglass reinforcement

•Pre-leveled tub bottom

•Sculptured rim design w/raised headrest

•Dual, molded-in arm rests

•Faucet deck/accessory area at drain end

•1.5 HP single speed, self-draining pump/motor

•Factory installed power cord with plug

•Eight multi-directional and flow-adjustable jets including:

-Two Ideal-flow jets at foot area

-Four body massage jets

-Two recessed back-rest jets

•Deck-mounted, air switch On/Off

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

❏2908.018WC StayClean™ Whirlpool Massage featuring System I

•Same as 2908.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

❏2908.028W Whirlpool featuring System II Same as 2908.018W except:

•2.0 HP, two speed, self-draining pump/motor with pulse feature

•Deck-mounted electronic control with 20 minute built-in timed safety shut off and Chrome bezel

❏2908.028WC StayClean™ Whirlpool Massage featuring System II

•Same as 2908.028W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

❏2908.002 Bathing Pool only

Nominal Dimensions: 66” x 36” x 24-1/4" (1676 x 914 x 616mm)

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

To Be Specified - Required:

❏Color:

❏Bath Faucet (Specify finish)

❏Bath Drain: 1583.470 (Specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Jet Trim Ring Kit: 9860.200-two per kit (Specify finish) for Body Massage Jets only

❏System II Control Bezel: 9861.100 (Specify finish)

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

BV-5

Rev. 10/05 © 2005 American Standard Inc.