Step 8. Choose special options
Special options add unique capabilities to the signal generator for specific applications.
Ordering number | Description | Purpose | Requires |
Wideband modulation less than 3.2 GHz |
| ||
|
|
| |
Add input and output of phase reference LO | Provides | Z5623AKxx | |
|
|
| Distribution Amplifier |
|
|
| (recommended) |
Add 1 GHz external phase reference | Provides |
| |
|
| carrier frequencies 100 kHz to 250 MHz |
|
Dynamic sequencing | Provides ability to change sequences on | ||
|
| command in the arbitary waveform generator |
|
Add second set of IQ inputs | Provides ability to switch between two | ||
|
| different external IQ inputs |
|
Add 1 GHz external frequency reference input | Enables use of an external frequency |
| |
|
| reference to improve spectral purity |
|
Step 9. Choose instrument connector configuration and accessories
Note: Standard 20 GHz models include a 3.5 mm (m) RF output connector on the front panel.
Standard 31.8 GHz and 44 GHz models include a 2.4 mm (m) RF output connector on the front panel.
Ordering number | Description | Purpose | Requires |
Standard with | 3.5 mm (f) to 3.5 mm (f) | Adapter set is included with the purchase of |
|
| the 20 GHz models to connect to 3.5 mm (m). |
| |
Standard with | 2.4 mm (f) to 2.4 mm (f) | Adapter set is included with the purchase of |
|
| the 31.8 GHz and 44 GHz models to connect |
| |
2.4 mm (f) to 2.9 mm (f) | to 2.4 mm (m) and 2.9 mm (m). |
| |
|
| included with the purchase of the |
|
|
| connector. |
|
Moves all front panel connectors to | Simplifies cable management in rack mount |
| |
| the rear panel | environments. |
|
PSG digital output connectivity with N5102A |
| ||
PSG digital input connectivity with N5102A |
| ||
Rackmount flange kit | Provides a flange kit to mount the signal |
| |
| generator into a standard EIA 19" rack. |
| |
Front handle kit | Provides front handles for carrying the |
| |
| instrument (not for rack mount). |
| |
Rack mount flange and front handle kit | Provides front handles and a flange kit to |
| |
| mount the signal generator into a standard |
| |
|
| EIA 19” rack. |
|
Master/slave interface cable | Provides an interface cable to use two PSG's |
| |
|
| in master/slave mode. |
|
Transit case | Provides a hard transit case to protect the |
| |
|
| instrument during transit. |
|
Transit case with wheels | Provides a hard transit case with wheels to |
| |
|
| protect the instrument during transit. |
|
N5101A | Baseband Studio PCI card | Enables N5110B Baseband Studio | |
512 MSamples of waveform memory | Waveform memory for the Baseband Studio | N5101A | |
|
| PCI card |
|
N5102A | Baseband Studio digital signal interface module | Provides digital I/Q and digital IF | |
|
| inputs/outputs to/from the E4438C ESG | |
|
| and E8267D PSG vector signal generators. | |
N5110B | Baseband Studio for waveform capture | Allows playback of I/Q waveform data | N5101A, |
| and playback | directly from a PC hard drive or the optional | |
|
| 512 MSa waveform memory on the N5101A |
|
|
| to the E4438C ESG or the E8267D PSG vector |
|
|
| signal generator. |
|
1.
2.
4