2
General Safety Considerations
General Safety Considerations
This product has been designed and tested in accordance with the standards
listed in the Manufacturer’s Declaration of Conformity, and has been supplied
in a safe condition. The product documentation contains informat ion and
warnings which must be followed by the user to ensure safe oper ation and to
maintain the product in a safe condition.
Before using this product, review the safety information for cautions and
warnings.
Use this product according to the enclosure protection provided. This product
does not protect against the ingress of water. This product protects against
finger access to hazardous parts within the enclosure.
WARNING If this product is not used as specified, the protection prov ided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.
WARNING No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
WARNING To prevent electrical shock, disconnect the Agilent N1022A from
probe power before cleaning. Use a dry cloth to clean the extern al case
parts. Do not attempt to clean internally.
CAUTION Do not use too much liquid in cleaning the product. Water can enter the
adapter, damaging sensitive electronic components.
CAUTION This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2, per IEC 61010-1 and 664 respectively.
Installation Category: Installation Categories (overvoltage categories) are
determined by the transient overvoltage levels that may be expected. CAT I:
Mains isolated. CAT II: Line voltage in appliance and to wall outlet. CAT III:
Line voltage behind wall outlet to next level of distribution.