ENGLISH

4.(Figure 13)Turn the second rear hopper tube so that the brace holes in the middle of the tube face up. Assemble the ends of the rear hopper tube onto the ends of the lower hopper side tubes. Fasten together using plastic plugs (Z).

7.(Figure 15) Insert the bag frame strap into the stitched sleeve along the front edge of the bag bottom.

8.(Figure 15) Assemble the bag frame strap to the lower hopper side tubes using two 1/4" x 1-1/8" clevis pins

(P) and 3/32" hair cotter pins (N).

REAR HOPPER TUBE

13

(brace holes on top)

 

 

PLASTIC PLUG (Z)

BAG FRAME STRAP

1/4" x 1-1/8"

CLEVIS PIN (P)

15

3/32" HAIR COTTER PIN (N)

LOWER

HOPPER SIDE TUBE

5.(Figure 14) Place the assembled lower hopper tubes into the bottom of the hopper bag

6.(Figure 14) Attach the ends of the lower hopper side tubes to the inside of the upper hopper side tubes using two 3/8" x 1/2" clevis pins (O) inserted from the inside, and two 3/32" hair cotter pins (N).

UPPER HOPPER

14

SIDE TUBE

 

 

3/32" HAIR COTTER PIN (N)

LOWER HOPPER

SIDE TUBE

3/8" x 1/2"

CLEVIS PIN (O)

HOPPER BAG

BOTTOM

9.(Figure 16) Secure the bag corners around the lower hopper side tubes by snapping the bag flaps to the bag bottom on both sides.

16

FLAP

SNAP

9