ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(2) Adjustable Wrench
(2)3/4" Open or Box End Wrench
(2)9/16" Open or Box End Wrench
(2)1/2" Open or Box End Wrench
(1)Pliers
1.Push split bearings (M) into both ends of each double spool tube. See figure 1.
1
M
M
2.Assemble a washer (K), 1.65" spacer (E), a washer (K), a spool assembly, a washer (K), a 5.29" spacer (G), a washer (K), a second spool assembly, a washer (K), a 2.38" spacer (D) and a washer (K) onto each of the axles. See figure 2.
K |
| 2 | |
K | SPOOL | ||
| |||
| ASSEMBLY |
| |
| K |
| |
D |
| SPOOL | |
K | ASSEMBLY | ||
|
| K | |
| G |
|
E
K
AXLE
3.Assemble the cross brace, mast extension straps and mast sides together using two category 1 pins (Q), 7/8" lock washers (R) and 7/8" hex nuts (S). Do not tighten yet. See figure 3.
3
MAST SIDE
MAST
EXTENSION
STRAP
CROSS BRACE
S 
R
Q 
