Interconnection

ies Smoke & Heat Alarms

RadioLINK

SYSTEM CONTROL DEVICES

Ei411H Wireless

Remote Control

Switch

When used in conjunction with RC alarms, with the Ei168RC RadioLINK base, the switch offers three vital remote control functions.

TEST - Provides a full system test equivalent to pressing the Test button on all units simultaneously

HUSH - Allows the silencing of any possible nuisance alarms LOCATE - Allows the source of

the alarms to be identified. This information is also held in the product memory

The Ei168RC RadioLINK Base Unit

At the heart of the RadioLINK system are the Ei168RC base units, which are fully compatible with any Ei160RC Series alarm.

It is from these that radio signals are transmitted and received.

An Ei168RC base is required for each of the alarms in the system.

Mains powered with rechargeable 10 year+ lithium cell back-up

Radio transceiver 868.499 MHz

Unique Easi-fit design with integral terminal block

Simple and secure house coding system

Interference free

Ei428 Remote Relay Module

Mains powered with rechargeable 10 year+ lithium cell back-up to ensure the relay operates even during a mains failure

Interfaces with other systems, e.g. warden call and other signal devices

Ei407 Wireless Manual Call Point

Allows manual testing of the system

Allows manual alarm to warn other residents

Easy to fit

Wire in each Ei168RC RadioLINK base to the mains electricity supply.

Ei410 Wireless Remote

Control - Hand Held

All the same features and functions as the Ei411H (above) - but built into a small key fob for personal use

Fitted with lithium button cell

Slide a 160RC Series alarm on to the Ei168RC base which will automatically activate the rechargeable back-up cells, and then repeat this procedure for all the alarms in the system.

House code each alarm in the system.

11

Page 11
Image 11
Aico 160 Series manual Interconnection Ies Smoke & Heat Alarms, System Control Devices, Ei168RC RadioLINK Base Unit