Devices

Carbon Monoxide

(CO) Alarms

ANCILLARY PRODUCTS

MCP401RC Manual Call Point

Supplied complete with surface mount box

Testing key supplied

Supplied with non-breakable operating element

LPC approved, conforms to BS EN 54-11

Can be used with 140, 150, 160RC Models

SAB300 Remote Strobe Xenon Beacon

Mains powered

For internal or external use

Flash energy of 3 watts and flash frequency of .9Hz

Clear or red lens options

For operation via an Ei158R or Ei128R relay

SABV4 High Intensity Strobe Xenon Beacon

Mains powered

Ideal for use where standard strobes may not be sufficiently visible

5 joule high intensity flash

Low current consumption

Red or opal lens option

For operation via an Ei158R or Ei128R relay

YO3 Remote Sounder

Mains powered

Use in areas where a warning is required - but a detector isn't

For internal or external use

Switchable sound outputs from 97-100dB(A)

For operation via an Ei158R or Ei128R relay

MDH230 Magnetic Door Holder

Mains powered

Will automatically release a fire door in the event of a fire

Test/Override button feature

Low current consumption

For operation via an Ei158R or Ei128R relay

Ei167 Remote Sounder

Interconnects with all mains operated smoke and heat alarms

Ideal for use where an alarm but no detection is required

AC mains indicator light

Further details of all the products featured on these pages are available from our Customer Service Helpline on 0870 758 4000 or visit our website www.aico.co.uk and download our product information

NO ALARM - NO CHANCE!

Carbon Monoxide or (CO), is a particularly insidious gas. It is a killer. The naked eye can't see it, it does not smell, it has no taste. The need for a reliable mains powered alarm that will operate even in the event of a mains failure is obvious.

The Ei professional range includes fully featured product usually specified by Local Authorities & Landlords and less sophisticated product where duty of care is not so much of an issue and where the mains supply is more likely to be continuous and /or regular battery maintenance is known to be reliably carried out.

The Ei261EN is the top of the range product. Current sensor technology used by all manufacturers of CO alarms has a limited life cycle; the sensors cannot be relied upon after a period of 5/6 years. The Ei261EN offers a replacement sensor feature, thereby increasing the life cycle of the product to ten years.

Ei261EN Mains Powered CO Alarm with Rechargeable Lithium Cells and Replaceable CO Sensor

10 year+ rechargeable lithium cell back-up designed to outlast the alarm

Replacement sensor module, minimum five year life

Easy to use test/hush button

Automatic self diagnostics

Distinctive alarm sound, easily distinguishable from a smoke alarm

Wall or ceiling mounting

Pre alarm warning

Interconnect feature - Can be interconnected with Ei smoke and heat alarms. Contact us for details

Comprehensive Indicator lights: Mains on / Fault / Alarm on

Optional digital display - Ei261DEN

Quick CO gas test feature

NOW WITH RC TECHNOLOGY OPTION

BS EN 50291: 2001

INTERCONNECT

FEATURE

RECHARGEABLE

LITHIUMI I CELLS

EASY TO

REPLACE

SENSOR MODULE

15

Page 15
Image 15
Aico 160 Series manual Devices Carbon Monoxide CO Alarms, Ancillary Products, No Alarm no Chance