Aico Ei261ENRC, Ei261DENRC manual Initialisation Time

B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 29

Initialisation Time	: 70 seconds. On power up red and amber lights flash momentarily to show
	they are operational.
Operating	: -10°C to 40°C
Temperature
Humidity Range	: 15% to 95% R.H. (non-condensing)
Audible Alarm	: 85dB(A) minimum @ 3m
Self Diagnostics	: Horn beep and amber fault light flashes every 40 seconds if a sensor fault is found.
Tamperproof	: Screwdriver needed to release from mounting plate. Additionally a tamper-
	proofing screw can be fitted to the mounting plate.
Rechargeable	: Fully charged cells can power unit in standby for over 4 weeks and without
Lithium Cells:	mains power, it can power the unit in alarm for over 2 hours. The unit beeps
	every 40 seconds if cells are depleted.
Interconnect	: Up to 12 Ei261ENRC/261DENRC CO Alarms can be interconnected, so
	that when one senses CO, all alarm. Alternatively, up to 12 Ei261ENRC/
	Ei261DENRC CO Alarms and Ei161RC/Ei164RC/Ei166RC Smoke/Heat
	Alarms can be interconnected provided that an Ei1529RC Remote Control
	is used.
Relay Module Ei128RBU	: This can be connected using the interconnect line.
with Ei128COV (optional)

29