Aiphone GF-NS, A manual Program Screens, Instructions

Models: GF-NS A

1 7
Download 7 pages 51.03 Kb
Page 1
Image 1
Software Program to load Data into GF-NS/A Digital Display Module

0905

Software Program to load Data into GF-NS/A Digital Display Module

- INSTRUCTIONS -

IMPORTANT! Read these instructions before loading or editing data in the GF-NS/A Digital Name Scrolling Module for the GF series multi-unit entry system.

This software program allows you to use a computer to load the following information into the GF-NS/A. Note that you will need to use a computer with a serial port along with the supplied connecting cable to plug into the GF-NS/A. If only a USB connection is available, then a USB to serial adapter will be needed.)

1.Select Language for use while programming (5 language options)

2.Change ID Code (4-digit code to get into program mode of unit)

3.Change Access Code (Up to 20 ID codes can be programmed to activate door release via keypad)

4.Resident Information (3- or 4-digit dialing codes and resident names. Max. 250 resident locations.)

5.Set Timer. Operation Timer = length of time until system returns to standby mode after being used. Program Timer = length of time unit stays in program mode after last information is entered.

6.Change Greeting (Scrolling message that appears when system is in standby mode. Max. 160 characters.)

PROGRAM SCREENS:

Aiphone Communication Systems

 

 

1700 130th Ave. N.E.

Toll Free Technical Support:

 

Bellevue, WA 98005

 

(425) 455-0510

1-800-692-0200

 

FAX (425) 455-0071

FAX 1-800-832-3765

Pg. 1

Page 1
Image 1
Aiphone manual Program Screens, Software Program to load Data into GF-NS/A Digital Display Module, Instructions