Operating Specifications, Special Notices

Performance Data Sheet

GE SmartWater Filtration System

GWF Cartridge

Health Claim Performance Certified by NSF/ANSI*

(100% safety factors built in for unmetered usage)

Standard No. 42: Aesthetic Effects

Parameter	USEPA	Influent	Effluent		% Reduction
	MCL	Challenge
	MCL	Challenge	Average	Maximum	Average	Minimum
Chlorine	–	1.9 ppm	0.02 ppm	0.05 ppm	98.90%	97.37%

T & O	–	–	–	–	–	–

Particulate**	–	200,000	3,978	7,800	98.00%	96.10%

Standard No. 53: Health Effects

Parameter	USEPA	Influent	Effluent		% Reduction
	MCL	Challenge	Average	Maximum	Average	Minimum
Turbidity	1 NTU***	24.3 NTU	0.07 NTU	0.1 NTU	99.71%	99.59%
Cysts	99.95% Reduction	105,750	26	55	99.97%	99.95%
Lead at pH 6.5	15 ppb	160 ppb	1 ppb	1 ppb	99.37%	99.37%
Lead at pH 8.5	15 ppb	150 ppb	1.8 ppb	4.3 ppb	98.80%	97.13%
Lindane	0.0002 ppm	0.00062 ppm	0.00005 ppm	0.00005 ppm	91.93%	91.93%
Atrazine	0.003 ppm	0.0084 ppm	0.002 ppm	0.003 ppm	76.19%	64.28%
2,4-D	0.100 ppm	0.272 ppm	0.042 ppm	0.090 ppm	84.89%	67.63%
Asbestos	99%	690 MFL/ml	0.32 MFL/ml	1.2 MFL/ml	99.95%	99.82%

*Tested using a flow rate of 0.5 gpm (1.8927 l/m); pressure of 120 psig (8.437 kg/cm 2); pH of 7.5±0.5; temp. of 68°±4.5° F (20°±2.5° C)

**Measurement in particles/ml

***NTU = Nephelometric Units

Operating Specifications

•Capacity: certified for up to 500 gallons (1893 liter); up to one year

•Pressure requirement: 40-120 psi (2.8-8.2 bar), non-shock

•Temperature: 33°-100° F (0.6°-38° C)

•Flow rate: 0.5 gpm (1.9 lpm)

General Installation/Operation/Maintenance Requirements

•Flush new cartridge at full flow for 3 minutes to purge out trapped air.

•Replace cartridge when flow becomes too slow.

Special Notices

•Installation instructions; parts and service availability; and standard warranty are included with the product when shipped.

•This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.

•Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

•The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.

•Check for compliance with the state and local laws and regulations.

System Tested and Certified by NSF International against ANSI/NSF Standard 42 & 53 for the reduction of:

Standard No. 42: Aesthetic Effects	Standard No. 53: Health Effects
Chemical Unit	Chemical Reduction Unit
Taste and Odor Reduction	Lead and Atrazine Reduction
Chlorine Reduction, Class I	Lindane and 2,4-D Reduction
Mechanical Filtration Unit	Mechanical Filtration Unit
Particulate Reduction, Class I	Turbidity Reduction
	Cyst and Asbestos Reduction

NSF®

Manufactured for: General Electric Company, Louisville, KY 40225

r10965v-1 specifications

The GE R10965V-1 is a notable electrical component that exemplifies advanced engineering in the field of electrical applications. This product is primarily recognized for its versatility and reliability, making it ideal for various industrial and commercial applications.

One of the standout features of the GE R10965V-1 is its robust design, which allows it to operate effectively under extreme conditions. Its durable construction ensures longevity, reducing the need for frequent replacements. The unit is built to withstand high temperatures, moisture, and other potentially damaging environmental factors, making it suitable for outdoor and challenging industrial environments.

The GE R10965V-1 incorporates advanced semiconductor technology, which enhances its efficiency and performance. This technology allows for better thermal management, reducing overheating risks and increasing the overall lifespan of the component. Additionally, the device supports a wide range of operating voltages, making it highly adaptable to various electrical systems.

Another significant characteristic of the GE R10965V-1 is its high current capacity. This feature is particularly beneficial for applications requiring substantial power supply, as it ensures that the device can handle increased loads without compromising performance. The internal circuitry is designed to minimize losses, further enhancing its reliability and operational efficiency.

In terms of safety, the GE R10965V-1 employs multiple protective features to prevent short circuits, overloads, and other electrical hazards. These safeguards contribute to overall system stability, making it a preferred choice for engineers and technicians who prioritize safety in their designs.

The installation process for the GE R10965V-1 is user-friendly, with straightforward wiring and mounting options that simplify integration into existing systems. This ease of installation is a considerable advantage for maintenance teams, as it reduces downtime and operational disruptions.

Compatibility is another defining aspect of the GE R10965V-1. It is designed to work seamlessly with a variety of control systems and monitoring tools, facilitating enhanced functionality and performance measurement. Users often appreciate this versatility, as it allows for easier upgrades and system enhancements.

Overall, the GE R10965V-1 stands out in the market due to its combination of durable construction, advanced technology, high current capacity, and safety features. It caters to a broad spectrum of applications and is widely regarded for its reliability and efficiency in delivering electrical power. As industries continue to evolve and demand more robust electrical solutions, the GE R10965V-1 remains a vital component for enabling progress.

GE r10965v-1 Operating Specifications, General Installation/Operation/Maintenance Requirements

Models: r10965v-1