Aiphone AI-CP170 specifications Instructions, Wiring Diagram

Interface Board for Non-Aiphone Speaker and Call Button with AI-900 System

- INSTRUCTIONS -

The AI-CP170 Interface board provides the necessary interface for any standard speaker with a 25V transformer and a Normally Open call button to be used as a remote station on the AI-900 system. Simple wire connections are provided for easy connection. Install the small circuit board behind the remote speaker or call button. Made for indoor use only.

WIRING DIAGRAM:

Connector on

AI-900RS Card

Blk

Brn

Org

*Top view of

connector

*Important, When connector is plugged into AI-900RS, Orange should be on top

Gray

Brown

Orange

Violet

Red

Black Violet

GY BR OG VI RD BK VI G

AI-CP170

*8 Speaker with

25V Transformer

Gray to

Common of

Transformer

Red to

1W Tap on Transformer

Red & Gray wires to Speaker

Violet wires to call button

Normally Open

Call Button

* For best acoustics, speaker must be located in the center of the room, mounted in the ceiling

SPECIFICATIONS:
Power Source:	Supplied by Main Frame (AI-900MF)
Speaker:	Use standard 8 ohm speaker with 25V transformer
Call Button:	Normally open momentary contact
Mounting:	Conceal behind speaker or call button
Terminations:	Color-coded prewired pigtails
Wiring:	3 conductor shielded, homerun from Main Frame to each speaker/call button
Wiring Distance:	2,625' w/ 22AWG, 4,265' w/ 18AWG
Dimensions (HxWxD):	1-3/8" x 15/16" x 1/2"
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005	TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
(425) 455-0510		AI-CP170 Instr.
FAX (425) 455-0071	E-MAIL: tech@aiphone.com	0309PHJS