I
SECURITY GUARD STATION | 1 |
INSTALLATION & OPERATION MANUAL
PRECAUTIONS
AWARNING (Negligence couldresult in death or serious injuryto people.)
1. Do not open the unit case. 8
2. Do not dismantle or alter the unit. Fire or electric shock could results.
3. Keep the unit away from water or any other liquid. Fire or electric shock could result.
4. Do not put any metal into the unit through openings. 8 Fire, electric shock or unit trouble could result.
A CAUTION (Negligence could resultininjury to people or damage to property)
1.Mount the unit on wall in a convenient location, but not 8 where it could be bumpedor jarredhjury could result.
2.Do not install or make any wire terminationswhile power8 supply is turned on. Unit trouble could result.
3.Before turning on power supply, make sure wires are not
4.Do not manually hold down hook switch to verify chime 8
cause your hearing damage.8
5.Do not press hard or put high impact on LCD. If glasscrossed or shorted. Unit trouble could result.volume. It sounds very loud near your ears and can
cover is broken, you may be injured, and never touch the liquid inside panel, as it can cause an inflammationon your skin. If the liquid adheres to any part of your body, mouth or eyes, immediatelygargle or cleanse with clear water for at least 15 minutes and consult your doctor.
6.Do not install the unit in any of the following locations, as it may cause the system to malfunction;
-High or extreme cold temperature area: under direct sunlight, near equipment that varies in temperature, in front of air
-Placessubject to moistureor humidity extremes. 8conditioner, inside a refrigeratedarea, etc.
-Placessubject to environmentalconditions,8 such as oil, dust, chemicals, salt, etc.
-Placessubject to constant vibration or impact. 8
-Placessubject to steam or smoke, such as near heating 8 appliances,cooking surface, etc.
GENERAL PRECAUTIONS
1.All the units, except the Entrance Station, is designed for indoor use only. Do not install them outdoors.
2.The system is not operable during a power failure.
3.In areas where broadcastingstation antennas are close by, intercomsystem may be affected by radio frequency interference.
4.Keep all wiring at least 30cm (1") away from AC
General Prohibitions | Prohibitionsto subject |
Prohibitionsto | the unit to water |
| |
dismantlethe unit |
|
NAMES AND FUNCTIONS | 1. Handset | PACKAGE CONTENTS | |
1 |
| 2. LCD display |
|
| 3. % CANCEL (or decide & back) | Mountingbracket | |
2 |
| 4. A SCROLL backward or move cursor to left | |
| 5 | = Packet of screws | |
3 | 6 | 5. SCROLL forward or move cursor to right | Connectingcable |
4 | * | 6. 0 CALL (or decide & next) | * INSTALLATION& OPERATION |
7 |
| 7. Digital keypad (1 |
|
| 10 | ~ h e n e n f e r i n g / e ~ | ] |
| 11 | Functions : * Dialing Room # |
|
| 12 | * Name search with @key and calling | 10. DOOR RELEASE button |
| 13 | 8. SERVICE button (Option) | 11. |
| 9. LIGHT button When communicationwith | 12. Call tone sounder | |
| 14 | Entrance Station, press to | 13. Call tone volume control |
|
| turn on external light. | 14. PC socket |
\ - | I |
|
|
PROGRAMMING METHODS
It is possible to write or change resident names - from your PC, making data input.
Download Programming & Alteration Method
from Aiphone's Web Site: - httix/iwww.aiDhone.com/
Cinnect your'PC with
On LCD display, see a message "AIPHONE to confirm system is in standby.
Prior to programming, it is suggested to have your own ID code newly registered, so that any other person cannot get into the system.
COMMUNICATIONFUNCTIONS
Calling & Communication
a.with ResidentialStations.
b.with EntranceStation.
c.with Security Guard Station.
d.PANIC call &
( * Includes
Security Guard Stations 1 & 2
Entrance b l.
==6.. ..........."....Y.
Firstly, enter program mode.
____ j
*In case your programmedID code is forgotten,
CALL
- 1 -
