Aiphone JA-DGV installation instructions Specifications, FCC Class B Verification

SPECIFICATIONS

Power Source:	Supplied by master station.
Consumption:	370mA (max.) 4.5mA (Standby, approximate)
Picture element:	CCD camera
Image view area
			Vertical			Horizontal
(approx.):	In horizontal position:		18"			26"
	When pan-and-tilted:		3'			6'
Min. illumination:	Less than 1 Lux (at 20" from camera).
Ambient temperature:	14° F ~ 140° F.
Wiring:	2 parallel wires, non-polarized to master. PE Insulated, low capacitance.
	Use Aiphone wire # 871802
Wiring distance:
	AWG	22AWG		18AWG
	Distance	165'			330'
Dimensions: (HxWxD)	10-3/16" x 7-5/16" x 5/8" (outer panel dimensions)
Mounting:	Flush mount: 9-1/16" x 6-1/8" x 2-11/16" (ABS plastic back box is included)
	Surface mount with SBX-DGV: 10-3/8" x 7-7/16" x 3-¼” (top), 2-½” (bottom)
Weight (approx.):	1.90lbs

FCC Class B Verification

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

—Reorient or locate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Note:

Only information pertaining to the connection and operation of the JA-DGV and devices interfacing with it are included here. For complete installation, wiring, and operational information about the JA system, please refer to the Installation Manual included with the monitor.

Aiphone Communication Systems
1700 130th Ave. N.E.	TOLL FREE TECHNICAL SUPPORT:
Bellevue, WA 98005		Pg. 3
(425) 455-0510	(800) 692-0200	JA-DGV instr.
FAX (425) 455-0071	E-MAIL: tech-serv@aiphone.com	1206JD