Aiphone JB-DVF-HID-I dimensions Instructions, Installation, Connecting the Reader to the Host

Vandal Resistant Color Video Door Station

With Built in HID iClass Smart Card Reader

- INSTRUCTIONS-

The JB-DVF-HID-I is a JB-series color video door station and an HID iClass Card Reader, built onto the same stainless steel faceplate. The card reader provides electronic access to a building through a separate Access Control System, which is not supplied by Aiphone.

INSTALLATION:

1.For flush mounting, cut hole in wall and use supplied back box. Box dimensions are 4-½”W x 10-⅜H x 1-¾”D.

2.For surface mounting, use the SBX-DVF-P surface mount box. This box can mount to a standard 1-gang box or to any flat surface.

JB-DVF-HID-I	JB-DVF-HID-I
(front view)	(back view)

11-⅝”

5-¾”

Connecting the Reader to the Host:

Connect the reader to the host according to the wiring table below and the host installation guide.

Wiegand	Wire Color
+ DC (10-16V)	Red
Ground	Black	20" pigtail cable
Data0	Green
Data1	White
Shield Ground	Drain
Green LED	Orange
Red LED	Brown
Beeper	Yellow
Hold	Blue
---	Violet

Pg. 1