Aiphone JF-2MED, JF-2HD Operations, Answering a door call HANDS-FREE mode, PTT mode

8 OPERATIONS

8-1 Answering a door call (HANDS-FREE mode, PTT mode)

English

Français

Nederlands

1 Press CALL button.

2 Chime tone sounds, caller is seen on video monitor, and outside sound is heard.

•Audio and video turns off after approx. 45 seconds in not answered.

3 Press TALK button momentarily, and after the beep, communicate hands-free. Transmit LED (red) lights when you talk, and goes off as you listen to caller (or hear outside sounds).

4 Press TALK button once again, and after the beep, communication ends.

Instant voice call function

2 Even without answering, door area can be seen and heard with video and audio (for approx. 45 seconds). Inside sound is not heard outside.

PTT mode

3 During communication, press and hold TALK button for 1 second or more to change to press-to-talk mode. A beep sounds, and after approx. 1 second another beep sounds, PTT mode is entered. If TALK button is pressed briefly (less than 0.5 seconds), communication ends.

4 To continue speaking using the press-to-talk mode, press TALK button for 1 second or more each time to talk, and release to listen to the caller.

5 Press TALK button again momentarily, and after the beep, communication ends.

NOTES: Communication (video) ends automatically after approx. 1 minute.

NOTES: If the blue and white wires of the option connector are shorted, PTT mode will not be operable.

8-2 Activating door release

1 During communication, instant voice call or entrance monitoring, 2 Press CALL button. press MENU/MEMO button to display the menu screen.

PRESS THE TALK BUTTON TO END

NOTES: When SET DOOR RELEASE setting is set

to "Not use", the release symbol is not displayed and the release cannot be performed. (Refer to section 7-8)

	3 Open door while the release mechanism is activated. During activation of door
PRESS THE TALK BUTTON TO END	release, the release symbol is displayed.

PRESS THE TALK BUTTON TO END

- 10 -