Aiphone NE-SSV manual Instructions, Installation

0607

Vandal Resistant Sub Station with built in Color Pinhole Camera for use with

NEM, NDR, NDRM Systems

- INSTRUCTIONS -

The NE-SSV is a 2-gang vandal and weather resistant sub station designed for use with the NEM, NDR and NDRM systems. It is constructed of 12 gauge stainless steel and has a stand alone color camera built in. It is also equipped with an option for an external output contact closure when the sub station places a call (relay required). The unit either flush mounts into a 2-gang box, or surface mounts using the SBX-2G. Each unit includes a 12V DC power transformer for the camera, tamper proof screws, and a tool for installation.

INSTALLATION:

1.For flush mounting, install sub station in standard 2-gang electrical box with minimum 2-1/2" depth.

2.For surface mounting, use the SBX-2G surface mount enclosure (sold separately).

3.Only the 12V DC power transformer included should be used to power the NE-SSV camera.

5.IMPORTANT! These units are designed for use in normal weather conditions, and to allow drainage and evaporation of moisture that naturally gets into the unit. Do not apply caulking or silicone sealant around the unit when installing, and do not use weather stripping around the perimeter of the box when mounting. If sealing the unit is required, the bottom must remain unsealed. Sealing the unit will prevent or inhibit moisture from dissipating from inside the unit, which may cause corrosion or deterioration of the internal components over time.

Front View Back View

Speaker

Camera

Call button

45cm

18”

50cm / 20”

67cm

26½”

50cm

20”

The view achieved if the subject is 20" from the	Transparent corner shadowing
camera is: 18" Vertically and 26½” Horizontally	on the picture is normal.

Page 1