Read And Save These Instructions, Description

MODEL/MODELO 2EKZ7/9046

OPERATING INSTRUCTIONS & PARTS MANUAL

WALL MOUNTED

OSCILLATING FAN

16" (40,6 cm) MODEL 2EKZ7/9046

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DE- SCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

DESCRIPTION

WARNING: USE OF A THREE-PRONG TO TWO-PRONG ADAPTER

The Air King 16” (40,6 cm) Remote Controlled - Wall Mounted Oscillating Fan features manual push button and remote control operation and also features a Timer function. It has a permanently lubricated motor and a 6' (1.82 m) 18/3 cord set. It also features an integrated safety plug.

SPECIFICATIONS

Motor	120V, 60 Hz
Blade diameter	16" (40,6 cm)
Speeds	3
Control	Push Button/Remote Control
Air flow distribution	45°

IS NOT RECOMMENDED. IMPROPER CONNECTION MAY CRE- ATE THE RISK OF ELECTRIC SHOCK. USE OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA.

WARNING: This plug is a safety feature. To reduce the risk of fire, electric shock and personal injury, do not remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this plug.

8. Where possible, avoid the use of extension cords. If they must

be used, minimize the risk of overheating by ensuring that they

are UL listed. Never use a single extension cord to operate more

than one Fan.

Key	Description	Part No.	Qty.
1	Front Grill w/Ornament	9046001	1
2	Spinner	9046002	1
3	Fan Blade	9046003	1
4	Guard Nut	9046004	1
5	Ring Screw	9046012	1
6	Grill Ring	9046011	1
7	Rear Grill	9046006	1
8	Motor Assembly	9046007	1
9	Wall Mount Plate Safety Screw	9046010	1
10	Wall Mounting Plate Screws	9046009	3
11	Wall Mounting Plate	9046008B	1
12	Remote Control	9046005	1

Llave Descripción		No. De Parte	Qty.

1	Rejilla delantera con adorno	9046001	1
2	Eje de pivote	9046002	1
3	Aspa del ventilador	9046003	1
4	Tuerca de protección	9046004	1
5	Tornillo de anillo	9046012	1
6	Anillo de rejilla	9046011	1
7	Rejilla trasera	9046006	1
8	Conjunto del motor	9046007	1
9	Tornillo de seguridad para
	placa de montaje de pared	9046010	1
10	Tornillos para placa de montaje de pared	9046009	3
11	Placa de montaje de pared	9046008B	1
12	Control remoto	9046005	1

MAINTENANCE

WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SER- VICING THE FAN.

WARNING: DO NOT IMMERSE FAN IN WATER!

CLEANING: Use a soft cloth moistened with a mild soap solution, such as liquid dish washing detergent. Dry ALL PARTS COMPLETELY before reassembling. After any maintenance or servicing, COM- PLETELY REASSEMBLE unit as described in this instruction manual before reconnecting to the power supply.

CAUTION:Do not use gasoline, benzine, thinner, harsh cleaners, etc. as they will damage the Fan. NEVER use ALCOHOL OR SOLVENTS. LUBRICATION: Precision bearings are sealed at the factory for life and will not require any further lubrication.

STORAGE: Store the Fan, with these instructions, in a cool, dry place.

MANTENIMIENTO

ADVERTENCIA: SIEMPRE DESENCHUFE EL CABLE ANTES DE MOVER O DAR SERVICIO AL VENTILADOR.

ADVERTENCIA: ¡NO SUMERJA EL VENTILADOR EN AGUA!

LIMPIEZA: Utilice un paño suave humedecido con una solución jabonosa liviana, tal como un detergente líquido para lavar platos. Seque TODAS LAS PARTES POR COMPLETO antes de rearmar. Después de dar mantenimiento o servicio, REARME POR COMPLETO la unidad en la forma descrita en este manual de instrucciones, antes de volver a conectarla a la fuente de poder.

PRECAUCIÓN: No utilice gasolina, bencina, acetona, limpiadores abrasivos, etc. puesto que dañarán el Ventilador. NUNCA use ALCOHOL O SOLVENTES.

LUBRICACIÓN: Los cojinetes de precisión vienen sellados de por vida en la fábrica y no precisarán ninguna lubricación adicional. ALMACENAMIENTO: Guarde el Ventilador con estas instrucciones en un lugar fresco y seco.

Approvals...........................ETL Listed. Close mesh Fan Guard
meets OSHA requirements.

	MODEL		2EKZ7/9046
	SPEED	HIGH	MED	LOW
	CFM	1480	1340	1140

	M3/s	0.70	0.63	0.54
	RPM	1275	1180	1040

	Amps	0.40	0.36	0.32
	Watts	50	43	37

	dBA	44	39	34

*Tested in accordance with AMCA standard 230-99

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following:

1.Read all instructions before using Fan.

2.Make certain that the power source conforms to the electrical requirements of the Fan.

3.Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.

4.Unplug power cord before installing, servicing, or moving the Fan.

WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE POWER CORD.

5.This Fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres.

6.DO NOT use Fan in or near a window. Rain may create an electrical hazard.

7.The power cord is equipped with a three-prong grounded plug that must be inserted into a matching receptacle. Under no circumstances should the grounding prong be cut off the plug. Where a two-prong wall receptacle is encountered, it must be replaced with a properly grounded three-prong re- ceptacle installed in accordance with the National Electrical Code (NEC) and all applicable local codes and ordinances. This work must be done only by a qualified electrician, using copper wire only.

9. Do not operate any Fan with a damaged cord or plug or after the

Fan malfunctions, has been dropped or damaged in any manner.

Return Fan to authorized service facility for examination,

electrical or mechanical adjustment or repair.

10.Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. Do not block or tamper with the Fan in any manner while it is in operation.

11.This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other water container.

12.Do not use Fan outdoors.

13.This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS FAN

DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

14.This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT

MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).

WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICES.

SAVE THESE

INSTRUCTIONS

Rev. A 5/08

9046ES