MODELO 4TM65A/9530A
NOTAS
OPERATING INSTRUCTIONS & PARTS MANUAL
9" HIGH PERFORMANCE PIVOT FAN9" (22.8 cm) MODEL 4TM65A/9530AREAD AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.The Airking 9" (22.9 cm) high performance pivot fan features
Motor | 120V, 60 Hz |
|
| |||
Blade Diameter | 9" ( 22.9 cm) |
|
| |||
Speeds | 3 |
|
|
|
| |
Control | Rotary Knob |
|
| |||
Air Flow Distribution | 112° Variable |
|
| |||
Approvals | UL listed. Close mesh fan guard meets | |||||
|
| OSHA requirements. | ||||
|
|
|
|
|
|
|
| MODEL | 4TM65A/9530A |
|
| ||
| SPEED | HIGH | MED |
| LOW |
|
| CFM | 700 | 610 |
| 520 |
|
| M3/s | 0.33 | 0.29 |
| 0.25 |
|
| RPM | 2100 | 1800 |
| 1500 |
|
|
|
|
|
|
|
|
| Amps | 0.50 | 0.43 |
| 0.37 |
|
| Watts | 58 | 51 |
| 45 |
|
|
|
|
|
|
|
|
| dB A | 54 | 50 |
| 46 |
|
When using electrical appliances, basic precau- tions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following:
1.Read all instructions before using Fan.
2.Make certain that the power source conforms to the electrical requirements of the Fan.
3.Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.
5.Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE
6.This Fan must NOT be used in potentially dangerous locations such as flammable, explosive,
7.DO NOT use Fan in or near a window. Rain may create an electrical hazard.
replaced with a properly grounded
WARNING: USE OF A
8.Where possible, avoid the use of extension cords. If they must be used, minimize the risk of overheating by ensuring that they are UL listed. Never use a single extension cord to operate more than one Fan.
9.Do not operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner. Return Fan to authorized service facility for examination, electrical or mechanical adjustment or repair.
10.Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. Do not block or tamper with the Fan in any manner while it is in operation.
11.Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power Cord so the Fan or other objects are not resting on it. Do not run Power Cord under carpeting. Do not cover Power Cord with throw rugs, runners, or the like. Arrange Power Cord away from room traffic and where it will not be tripped over.
12.This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other water container.
13. Do not use Fan outdoors.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICES.
Rev. E 7/05 | 8 |
| that must be inserted into a matching receptacle. | Under no | SAVE THESE |
| 2. The power cord is equipped with a | INSTRUCTIONS | |
| circumstances must the grounding prong be cut off the plug. | ||
|
| ||
| Where a |
| |
2084532 | Rev. E 7/05 | 1 | 2084532 |