Airlink ARW027 - page 15

Connect the Router using Wireless LAN

Notebook

Wireless LAN Networking

WirelessBroadband Router

xDSL Modem

WAN port

1. Connect one end of the network cable to the WAN port of the

Wireless Router and connect the other end of the cable to a DSL or

Cable modem.

Powering On

1. Power on the DSL/Cable modem first. Then power on the wireless

broadband router by connecting the power adapter to the power jack of

the router. Finally, power on your computer.

Check the Installation

The control LEDs of the Wireless Router are clearly visible and the status

of the network link can be seen instantly:

1. With the power source on, once the device is connected to a

broadband modem, the Power, LAN, WLAN and WAN port link

LEDs of the Internet Broadband Router will light up indicating a

normal status.

2. When the WAN is connected to the ADSL/Cable modem, the WAN

port’s Link/ACT LED will light up.

3. When the LAN is connected to the computer system, the LAN port’s

Link/ACT LED will light up.