Airlink101 AGIGA32PCI manual Section, Installing Hardware, Installing Driver, Package Content

Ver. 2A

Quick Installation Guide

10/100/1000Mbps PCI Adapter

Model # AGIGA32PCI

Package Content:

• 32-bit PCI Gigabit Ethernet

Card

• Driver Disk

• Quick Installation Guide

Section 1

Installing Hardware

Step 1 Shut down the computer, unplug its power cord, and remove the chassis cover.

Step 2 Insert the Ethernet card into a PCI slot on the computer and secure it with a chassis screw.

Step 3 Cover the computer’s chassis.

Step 4 Connect an Ethernet cable to the RJ-45 port of the Ethernet card. Step 5 Re-plug the power cord and turn on the computer.

Section 2

Installing Driver

Note: The following steps and screen shots are for Windows XP. Steps for other Windows operating systems will be noted beneath each screen shot.

Step 1 At the Found New Hardware Wizard, select Install from a list or specific location (Advanced) and click Next.

Windows 2000: Click Next at the Found New Hardware Wizard. Select Search for a suitable driver for my device (recommended) and click Next.

Windows ME: Click Next at the Add New Hardware Wizard. Select Specify the location of the driver (Advanced) and click Next.

Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search for the best driver for your device (Recommended) and click Next.