Package Contents:
•Night Vision Pan & Tilt Network Camera
•Wall Mount Kit
•GPIO Connector
•Power Adapter
•Ethernet Cable (Cat.5)
•Utility CD
•Quick Installation Guide
Section 1
This Quick Installation Guide only provides basic instructions. For detailed information on using this product, please refer to the User’s Manual on the supplied CD.
Getting Started
Step 1 Connect one end of the Ethernet cable to the IP Camera and connect the other end to one of the LAN ports on your router or switch.
Step 2 Power on the IP Camera by connecting one end of supplied power adapter to the power jack of the Camera and connecting the other end to the electrical outlet.
Step 3 Verify that the yellow light (Power) is solid and the green light (Link) is blinking.
