Section 1

Connecting the Print Server

Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any other USB device to the Print Server may damage the Print Server.

Note: Do not plug the power cord to the Print Server until you have reached Step 4 of this section.

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a router.

Step 2 Make sure all the printers are powered OFF, then connect one end of the printer cable to the printer port of the Print Server and attach the other end of the cable to the printer port of the printer.

Step 3 Power ON the printer(s).

Step 4 Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Page 1 Page 3
Page 2
Image 2
Airlink101 APSUSB2 manual Section, Connecting the Print Server
Page 1 Page 3
Top Page Image Contents