Airlink101 AWLH4130 user manual Power save Mode

a peer network client without the use of an access point Infrastructure: for connecting to an access point only

Ad-Hoc: for connecting directly to another wireless client without using an Access Point or wireless router. (Both wireless clients must be set to using Ad- Hoc mode).

Automatically connect to non-preferred networks: Check the box to connect to non-preferred networks upon startup.

Advance Setting:

Disable Radio: Check the box to disable the radio signal

Radio Frequency: 802.11b/g switches automatically between 802.11b and 802.11g speed depending on the other wireless devices. 802.11b will only connect at 802.11b speed (11 Mbps or lower).

Start ad hoc network: Choose the appropriate frequency for your ad-hoc network

Ad-Hoc Channel: Choose the desired channel for your ad-hoc network. All devices in the ad-hoc network must use the same channel.

Power save Mode:

Fast Save - This setting consumes half the power. Max Save - This setting consumes the least power. Disable - This default setting consumes the most power.

Transmit Power: Choose to transmit power from 100%, 50%, 25%, 12.5% and Lowest.

Super G: Enable or Disable the Super G function (108Mbps). In order to transfer speeds at 108 Mbps, all wireless devices must be Super G compatible and set to use Super G.

eXtend Range: Enable or Disable eXtend range

Fragmentation Threshold: Set the desired fragmentation threshold

RTS Threshold: Set the desired RTS threshold