Airpura Industries warranty Titanium Dioxide Photocatalytic Oxidization, The Airpura P600+

Technical

Specifications

TitanCleanTM

Photocatalytic Oxidization reflector US patent pending #29249549 Titanium Dioxide (TiO2) coated reflector surface

UV Germicidal Lamp

20 watts. 30,000 um per sec 2

Odor & chemical filtration

18 lbs activated carbon 13" x 13" x 9"

Carbon bed

2" deep x 570 sq'' surface

Particle removal

40 sq ft true HEPA (Measured 1 side only) 10 pleats per inch Pleats warm rolled with separators

P600

Photocatalytic Oxidization

Titanium Dioxide Photocatalytic Oxidization

Developed and used in space technology laboratories for both air and water purification the Photocatalytic Oxidation (PCO) process is simple and elegant.

A metal surface coated with a metal oxide is irradiated with UV light to produce hydroxyl radicals and super-oxide ions.

The hydroxyl radicals and super-oxide ions break the molecular bonds of chemicals they come into contact with and slice them into smaller compounds, that are further broken down until only carbon dioxide and water vapor are left.

For maximum efficiency, the process requires a sufficient surface area of reflective metal coated with a metal oxide to be positioned at a critical distance from the UV lamp while still allowing a good flow of air to bring the aiborne chemicals into contact with the resulting hydroxyl radicals and super-oxide ions.

The Airpura TitanClean Reflector

Air Flow 560 cfm

More cfm than any other home unit available

Pre-filter

570 sq in x 1in deep

Housing

Powder coat steel

Size

23" x 15"

Weight

45lbs total

Voltage Options

115 or 220 volts

Watts

120 on high 40 on low

Sound Level

28.1db on low (at 6 feet)

62.3db on high (560 cfm) (Room level 25.1 db)

ETL Certified

Conforms to ANSI / UL 507 and CSA C22.2 no 113

The TitanClean Reflector provides a large amount of TiO2 coated surface area (115% of the width of the UV lamp)

The angled reflector design maximizes the range of photo-catalytic oxidation within the filter chamber and increases the germicidal effect of the lamp.

The UV germicidal lamp maintains 98% of its direct irradiation intensity due to the interior position of the TitanClean reflector

The location of the TitanClean reflector and the UV light in the center of the filter chamber allows them to work in concert with the HEPA filter.

Particulate pollution is stopped by the Hepa filter before reaching the reflector. This keeps the coated surface cleaner and more effective.

The diffusion of the germicidal dosage from the UV lamp is enhanced in the confined chamber.

Contact time of airborne chemicals is increased as they slow down passing through the Hepa.

The TitanClean Catalytic Oxidizer combined with the 18lb Activated Carbon filter offers the most complete airborne chemical and VOC abatement available today

The TitanClean reflector positioned in the center of the filter chamber

Your Airpura Dealer

The Airpura P600+

Premium Titanium Dioxide Coating

The Airpura P600+ model features a premium titanium dioxide coated surface area. The specially coated Hepa filter offers an additional 3 times the photocatalytic capacity to deal with especially heavy concentrations of airborne chemicals.

The Most Complete Chemical and VOC Filtration Available Today