QUICK REFERENCE GUIDE
ELECTRONIC MONITORING CONTROL SYSTEM
Important! To activate the controller after turning on the control power, press the reset button.
Setting the dry, cool, unload and out of grain timers:
•Press the dry, cool, unload or out of grain button
•Press the modify button
•Press the increase or decrease button to get desired setting
•Press the enter button when desired setting is reached
Setting the load and unload delays:
•Press the load or unload button
•Press the modify button
•Press increase or decrease button to get desired setting
•Press the enter button when desired setting is reached
Pressing the increase and decrease buttons simultaneously will access the following programming features:
•Safety circuit shutdown log
•Dryer model number
•Fan delay
•BPH factor
•Metering roll monitor disabling feature
•Air switch disabling feature
These features are accessed se- quentially as listed above. Press the
increase or decrease buttons to change a setting. Press the enter button to move from feature to fea- ture.
Pressing and holding the reset but- ton for five seconds will access the following programming features:
•Calendar year setting
•Calendar month setting
•Calendar day setting
•Clock hour setting
•Clock minute setting
•Bushel counter reset
•Batch counter reset
These features are accessed sequen- tially as listed above. Press the in- crease or decrease buttons to change a setting. Press the enter but- ton to move from feature to feature.
Change the marquee on the LCD dis- play:
•Press and hold the modify button while turning on the control power
•To change a character press the increase or decrease button
•To move the cursor to the right press the unload button
•To move the cursor to the left press the dry button
•To delete a character press the cool button.
•Press enter when the desired marquee is displayed
To reset the computer to the original default setting, turn off the computer, press and hold the green AUX 1 but- ton and turn on the computer. NOVRAM will appear on the LCD dis- play. The year, date, time and min- utes may be changed now, and the shutdown history may also be cleared.
Note: If the history is cleared the dryer model number must be reset or only the bottom fan will operate.
Dryer owner and Airstream associates check the Electronic Monitoring Control System.
49
