Chapter 4
SpeedTouch™ Web Interface
E-DOC-CTC-20050429-0099 v1.0
80
4.6.5 Interface Settings
Overview The Overview page gives you an overview of the current interface settings.
Configure The Configure page allows you to:
Change the IP address settings of the SpeedTouch™.
Change the DHCP IP address pool settings.
Assigning a new IP
address to the
SpeedTouch™
Under IP Addresses:
1Type the IP address of your choice (for example 192.168.1.1) in the left text
box.
2Type subnet mask in the right text box (for example 255.255.255.0).
3Click Add.
4Network devices using the same subnet mask can now access the
SpeedTouch™ using this IP address.
!Before changing the DHCP pools, make sure that at least one IP
address of the SpeedTouch™ uses the same subnet as the IP addresses
in the DHCP pools.