Chapter 4
SpeedTouch™ Web Interface
4.5.9 New Content Level
Introduction This page allows you to create a new content level. To access this page:
1On the Toolbox menu, click Web Site Filtering.
2In the upper right corner, click Configure.
3Under Pick a task..., click Create a new content level.
Procedure To apply a new content level following actions must be performed:
1Content level creation
2Content level configuration
3Content level definition
4Content level activation
!You can create up to 16 content levels.
Content level creation Proceed as follows:
1In the Name box, type a name for the new content level.
2In the Description box, type a short text to describe what this security level will do.
3Click Next.
Content level configuration
Content level definition
Proceed as follows:
1The Configuration section becomes available.
2Click:
Clone Existing Level to start from a previously created content level.
If no levels have been defined before, this option will not be shown.
Black List to allow all web sites by default.
White List to block all web sites by default.
3Click Next.
Only web sites that match the selected content level will be allowed. Proceed as follows:
1If you want to:
Allow a category:
Select the check box next to the category name.
Allow an entire group:
Select the check box next to the group name.
Block a category:
Clear the check box next to the category name.
Block an entire group:
Clear the check box next to the group name.
2Click Apply.
66 | |
|
