Chapter 4
SpeedTouch™ Web Interface
4.5.4 Game or Application Definition
Accessing the Game or Application Definition page
Overview
Proceed as follows:
1In the Toolbox menu, click Game & Application Sharing.
2In the Pick a task... list, click Modify a game or application.
3Click the name of the game or application you want to view/change.
This page gives you an overview of the port mappings used to allow this service or game to be initiated from the Internet.
Consult the user’s guide or support pages of your application to know which ports are being used by this application.
A service is made of one or more TCP/UDP port ranges. Each incoming port range can be translated into a different internal (local network) port range. Port ranges can be statically assigned to devices or dynamically assigned using an outgoing trigger.
Configure Under:
Game or Application Name you can:
Change the name of the game or application.
Game or Application Definition you can:
Change the TCP/UDP port definition for this game or application.
Adding a Port Translation rule
Proceed as follows:
1In the Protocol list, click the protocol the game or application uses.
2In the Port Range box, type the port range the game or application uses.
3In the Translate To... box, type the port range to which the SpeedTouch™ has to translate the ports specified under Port Range.
4If you want to make a dynamic translation rule you must specify a trigger protocol and port.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger port, it will activate this translation rule.
5Click Apply.
59 | |
|
