■PRECAUTIONS

●Do NOT install the unit in a location where it may be subjected to:

— Direct sunlight or other sources of excessive heat

— Fluid, rain or moisture

— Excessive dirt or dust

— Excessive vibration

●This unit is designed to be operated on a 12-volt DC negative-ground electrical system only.

●Choose the mounting location carefully so that the unit will not interfere with normal driving functions.

●Before making connections, disconnect the @ terminal of the car battery to avoid short circuiting.

Notes on CDs

●A defective or soiled d!sc stored in the disc magazine can cause the sound to drop out during play.

●Always handle a disc by holding its Inner and outer edges.

●Clean the discs before inserting them into the disc magazine. Always clean a disc from the center outward with a cleaning cloth.

●There may be burrs left on the inner and outer edges of a brand-new disc. The burr may cause the malfunction of the unit or sound drop- out. To prevent these problems, if the burr is left on the disc, be sure to remove them with a ball-point pen, etc. as illustrated.

Ball-point pen

Burr

●Do NOT touch the surface of the unlabeled side of the disc.

●Do NOT attach paper or tape etc. to a disc.

●Do NOT expose the discs to direct sunlight or excessive heat.

Burr@

Ball-point pen

%

●NEVER usesolventssuch as benzineoralcohol to clean a disc.

●You cannot play an 8-cm (3-inch) CD — even with the specially designed adaptor.

●Do NOT use irregular shape CDs (example: heart-shaped, octagonal ones).

It may result in malfunction.

Notes on the disc magazine

●Do NOT leave the disc magazine in a place subject to excessive temperature or humidity.

●Do NOT insert more than one disc per slot.

●Do NOT drop the disc magazine.

ENGLISH 2