Aiwa CA-DW538 Presetting Stations, Sound Adjustment, Repeat steps 1, Mode equalizer

0-9, +10

DISPLAYMODE

BAND EQ

VOL i, k

r, tcPLAY sSTOP

PRESETTING STATIONS

You can preset up to 15 stations in each band.

1 Select a station.

2 Press * sMEMORY once so that “M” is displayed to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Preset number

Frequency

* or s STOP on the remote control

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 15 preset stations have already been stored for a band.

To listen to preset stations

Select a band then press e PRESET repeatedly.

cPLAY on the remote control is also available.

To select a preset number directly with the remote control

Press the numbered buttons 0-9 and +10. Example:

To select number 15, press +10 and 5. To select number 10, press +10 and 0.

To clear a preset station

Select the preset number first. Within 4 seconds, keep

spressed until “M” and the preset number disappear in the display.

The higher numbers in the band are decreased by one.

SOUND ADJUSTMENT

Volume or tone adjustment does not affect recording.

VOLUME (VOL)

Press VOLUME N or M. The volume level is displayed as a number from 0 to MAX (25).

•The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. (except when turning the power back on within 4 seconds)

•Pressing DISPLAY on the remote control displays the adjusted volume level.

3-mode equalizer

Press one of the 3-mode equalizer buttons (ROCK, POP, JAZZ). The selected mode R (Rock), P (Pop) or J (Jazz) appears in the display for 4 seconds.

To cancel, press the selected mode button. ROCK - Emphasizes the high and low range of music.

POP - Emphasizes voice and midrange of music. JAZZ - Emphasizes the low range of music. When using the remote control, press EQ repeatedly until the desired mode is selected.

The equalizer mode changes to ROCK, POP, JAZZ or no equalization, cyclically.

QSURROUND system	En
The QSURROUND system built into this unit uses
only two speakers at the left and right to create an
atmosphere that sounds as if you are surrounded
by two front speakers and two rear speakers.
Press QSURROUND and the QSURROUND
indicator lights up.

•The QSURROUND system does not work for monaural sources.

•At higher volumes, turning QSURROUND on may cause sound distortion. In this case, make the volume down.

ENGLISH 7