Aiwa CA-DW538 Dubbing A Tape, Microphone Mixing, Press con deck, To prevent accidental erasure

Press TAPE/POWER/6STANDBY to turn the power off.

Insert a tape to be recorded on into deck 1 with the side to be recorded facing out.

Insert a tape to be played into deck 2 with the side to be played facing out.

DUBBING A TAPE

1

2

3

4 Press athen press won deck 1 to enter recording pause mode.

The power is turned on.

cis pressed simultaneously.

5 Press DUBB SPEED HIGH/LOW to select a dubbing speed.

The HIGH-SPEED DUBBING indicator lights up: Dubs at high speed.

The HIGH-SPEED DUBBING indicator goes off: Dubs at normal speed.

6 Press con deck 2.

aon deck 1 is released and recording starts.

To stop recording, press Z on deck 1 and deck 2. The power will be automatically turned off.

NOTE

When recording near a television, noise may be recorded. Move the unit away from the television.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Side A

Tab for side A

MICROPHONE MIXING

Connect a microphone with a mini plug to the MIC jack and play a source to be mixed.

To record the microphone mixing sound, insert a tape in deck 1 and press w.

•During dubbing at high speed, the microphone mixing sound is not recorded.

MIC VOL – Adjusts the microphone volume. If a howling sound is produced, turn the volume down.

•To prevent howling, hold the microphone away from the speakers. The use of unidirectional type microphones is also recommended.

En

ENGLISH 11