PRECAUTIONS
•Use only in a
•Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.
•When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.
•Do NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
•Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure.
•When your vehicle has been parked in direct sunlight resulting in a considerable rise in the temperature inside, allow the unit to cool off before operating it.
•Keep the volume at a level at which you can hear outside warning sounds (horns, sirens, etc.).
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.
In addition to ordinary CDs,
For installation and connections, refer to the separate
“INSTALLATION AND CONNECTIONS.”
1 ENGLISH
TABLE OF CONTENTS |
|
THEFT PROTECTION | 2 |
BASIC OPERATION, AUDIO AND CLOCK |
|
ADJUSTMENT | 2 |
RADIO OPERATION | 3 |
CD PLAYER OPERATION | 4 |
AUXILIARY EQUIPMENT | 5 |
OTHER FUNCTIONS | 5 |
TROUBLESHOOTING | 6 |
MAINTENANCE | 6 |
SPECIFICATIONS | 6 |
Note
Some buttons are assigned two or more functions. For detailed descriptions, refer to the related pages.
CD Notes
•Playing a defective or dusty CD can cause dropouts in sound.
•Hold CDs as illustrated.
•Do NOT touch the unlabeled side.
• Do NOT attach any seal, label or data protection sheet to either side of CD.
•Do NOT expose a CD to direct sunlight or excessive heat.
•Wipe a dirty CD from the center outward with a cleaning cloth.
Never use solvents such as benzine or alcohol.
•This unit cannot play
•NEVER insert a
The unit may not be able to eject it, resulting in a malfunction.
Resetting the unit
Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object such as a pencil.
Front panel detached
Reset button
Note
Pressing the reset button will erase the clock and some memorized functions.
DEMO (Demonstration) mode
The unit has an extra display (DEMO) mode which demonstrates the illumination modes of the unit. The unit switches to DEMO mode automatically if you turn the unit on and leave it as it is for 5 seconds after all the connections have been completed.
To cancel DEMO mode
1During DEMO mode, press and hold Jog dial (PUSH- SOURCE) until “ILL” appears on the display.
2Press + or – to select “DE.”
3Turn Jog dial to select “0.”
To resume DEMO mode, select “1” in step 3. (See the illustration on page 2.)
