Aiwa Specifications, Steering Wheel Remote Control CDC-X517M and CDC-X417, AUX in input

SPECIFICATIONS

RADIO SECTION

(FM)

Frequency Range: 87.5 MHz – 108 MHz (100-kHz steps)* or 87.5 MHz – 108 MHz (50-kHz steps)* Usable Sensitivity: 12.7 dBf

50 dB Quieting Sensitivity: 17.2 dBf

IF Rejection: 80 dB

Frequency Response: 30 Hz – 15,000 Hz

S/N Ratio: 63 dB

Stereo Separation: 35 dB at 1 kHz

Alternate Channel Selectivity: 70 dB

Capture Ratio: 3 dB

(AM)

Frequency Range: 530 kHz – 1,710 kHz (10-kHz steps)* or 531 kHz – 1,602 kHz (9-kHz steps)* Usable Sensitivity: 30 µV (30 dB)

STEERING WHEEL REMOTE CONTROL (CDC-X517M and CDC-X417)

Dimensions: approx. 67 (W) ⋅ 26 (H) ⋅ 27 (D) mm (2 3/4 (W) ⋅ 1 1/16 (H) ⋅ 1 1/8 (D) inches) (excluding holder)

Weight: approx. 38 g (1.33 oz.) (including holder, battery)

Supplied Accessories: Mounting kit (1 set), Lithium battery (1)

•Specifications and external appearance are subject to change without notice due to product improvement.

REAR PANEL

CDC-X517M

* Set the frequency increment for your area using

the switch on the bottom of the unit. (The switch	CDC-X417, CDC-X317
is factory-set to the 10k position [for the U.S.A.])

CD SECTION

Frequency Response: 17 Hz – 20 kHz +0/–3 dB

Dynamic Range: More than 80 dB

Channel Separation: More than 65 dB

S/N Ratio: More than 85 dB

Wow/Flutter: Not applicable

AUDIO SECTION

Max. Power Output: 50 W ⋅ 4 channels (CDC-X517M), 45 W ⋅ 4 channels (CDC-X417,CDC-X317)

AUX IN input

Input sensitivity (load impedance) AUX IN: 300 mV (10 kΩ )

GENERAL

Power-Supply Voltage: 14.4 V (11 to 16 V allowable), DC, negative ground

Load Impedance: 4 Ω

Tone Control:

Bass ± 10 dB at 100 Hz, Treble ± 10 dB at 10 kHz Preamp Output Voltage (load impedance): 2.2 V (10 kΩ )

Installed size: 182 (W) ⋅ 53 (H) ⋅ 155 (D) mm (7 1/4 (W) ⋅ 2 1/8 (H) ⋅ 6 1/8 (D) inches)

Supplied Accessory: Carrying case (1)

ENGLISH 8